Camera Batteries, Chargers, Cages and Grips for Wholesale Inquiry

A supplier of camera power and rigging accessories

Shenzhen Ringteam Technology Co., Ltd. supplies replacement camera batteries, battery chargers, camera cages, camera grips, power adapters, dummy batteries and related photographic accessories. The range is built around one job: keeping cameras powered and mounted on set, on location, and in the studio.

This site is organised by product family and by fitment, so a buyer can start from the accessory type or from the camera line and reach the same inquiry form. Every brand name on this site appears only in "for", "fits" or "compatible with" form: these are replacement and compatible accessories, not products of the camera brands themselves.

Batteries, chargers, cages and grips

The battery range covers replacement packs for Canon, Nikon, Sony, Fujifilm, Panasonic, GoPro and action-camera lines, with charger families for single, dual and multi-bay charging. The cage and rig range covers camera cages and shoulder rigs for mirrorless and cinema bodies, and the grip range covers battery grips for DSLR and mirrorless bodies.

Three products carry full specification tables on this site, each read from the supplier's own product page: the Action6 replacement battery, the DMW-BLK22 LCD dual charger, and the camera cage for Sony A7III, A7RIII and A9 bodies. All other pages are family or fitment pages and carry no specification tables, because no further detail pages were opened for those lines.

Wholesale inquiry, not a retail storefront

This site is written for trade buyers. It carries no prices, no order-quantity figures and no delivery figures. Before ordering, confirm the battery or charger code printed on your original item, the voltage and capacity you need, the charger input your setup uses, and the certification scope and warranty terms that apply to your order. Confirm MOQ, lead time and pricing for your order through the inquiry form before payment.

Certificates available upon request.

Battery families by camera brand

Replacement batteries are organised here by camera brand and by battery code. Canon lines cover LP-E10, LP-E17, LP-E6, LP-E8 and LP-E5 code families plus Rebel-series batteries. Nikon lines cover D-series batteries and EN-EL codes including EN-EL15C, EN-EL14A, EN-EL15 and EN-EL3e. Sony lines cover NP-FZ100, A6000-series, NP-FW50 and A7III-series batteries. GoPro lines cover the Hero battery family. Fujifilm, Panasonic and other brand lines are covered at category level.

Each code family has its own fitment page. Fitment pages carry no specification tables: they name the family, list the search terms covered on the page, and ask the buyer to check the code printed on the original battery before ordering. That restraint is deliberate. A code family page that invented voltages or capacities for codes whose detail pages were never opened would mislead buyers, so this site publishes specifications only where the supplier's own product page was read.

Charger families, from single bays to multi-functional units

Chargers are organised by the battery code they charge and by input. The families on this site are DC dual chargers, multi-functional chargers, AC dual chargers, AC travel chargers, single USB chargers and dual-plate USB chargers, plus USB-input chargers for location work. Brand-line charger pages cover Canon, Nikon, Sony, GoPro, Panasonic and Fujifilm lines.

The one fully specified charger on this site, the DMW-BLK22 LCD dual charger, shows what a complete charger specification looks like. Its detail page lists the display, the slots, the inputs, the per-slot output, the protections and the body material, each stated plainly for that charger. Buyers comparing other chargers can use those same six points — display, slots, inputs, per-slot output, protections, material — as a checklist, and confirm the answers for their charger before payment. A charger page that leaves any of those six points unanswered has not finished the comparison, and the inquiry form is the place to ask for the missing answers before payment, with the battery code and the camera model in the message so the supplier can answer for the exact item.

Cages, rigs, grips, adapters and dummy batteries

Camera cages protect the body and add mounting points. The one fully specified cage on this site, for Sony A7III, A7RIII and A9 bodies, has its own detail page with a specification table covering its build, finish, thread sizes, mounts, grip and access to controls. Buyers comparing other cages can use those same points as a checklist and confirm the answers for their cage before payment. Rigs grow out of cages into handheld and shoulder setups.

Grips add a second battery slot and a vertical shutter position for portrait shooting; the grip range here is category level only, covering Canon, Nikon, Sony, Fujifilm and Pentax bodies without specification tables. AC power adapters let cameras run from mains power for studio work and long recordings, and dummy batteries, or DC couplers, sit in the battery compartment and feed the camera from an external source. Both families are matched by camera brand and by the battery code they replace, so the code printed on the original item is the starting point for either.

Three products with full specification tables

Only three products on this site carry full specification tables, because only three supplier product pages were opened in full. The Action6 replacement battery has its own detail page with a full specification table, fitting DJI Osmo360 Action6/5/4/3 cameras as a compatibility statement only. The DMW-BLK22 LCD dual charger has its own detail page with a full specification table, with a compatibility list covering Panasonic Lumix cameras using DMW-BLK22 batteries. The Sony cage has its own detail page with a full specification table, fitting Sony A7M3, A7R3, A9, A7R2 and A7M2 bodies. The numbers for each of those three products live on their detail pages and are not repeated here, so that a buyer always reads them in one place, next to the fitment they belong to.

Every other page on this site is a family or fitment page. If a buyer needs specifications for a code family that has no specification table here, the inquiry form is the route: send the code and the camera model, and the supplier can confirm the specification for that item before payment.

Questions trade buyers ask before ordering

Which code do I need? The code printed on the original battery or charger. If the code is worn off, the camera model and the battery compartment shape narrow it down, but the code itself is the reliable match, and this site asks buyers to confirm it before payment.

Are these original-brand products? No. Everything here is a replacement or compatible accessory. Brand names appear only in "for", "fits" or "compatible with" form, and no page claims affiliation with, or endorsement by, any camera brand.

Why do some pages have no specification table? Because no detail page was opened for that code family. Publishing a table from a category listing would mean inventing numbers, and this site does not do that. Family pages describe the family and ask the buyer to confirm the specification through an inquiry.

What should an inquiry include? The product code, the camera model, and the quantity range being planned. Certificates available upon request.

Browse by fitment: every code family on this site

Canon LP-E10 batteries and chargers: the entry-level Canon code family, with its own fitment page and a charger term covered on the same page. Canon LP-E17 batteries and dummy batteries: the LP-E17 code family, including dummy-battery terms. Canon LP-E6 batteries: the LP-E6 and LP-E6N code family, including LP-E6NH terms and dummy-battery terms. Canon Rebel-series batteries: the Rebel battery family, covering the Rebel terms mapped to that page.

Nikon D-series batteries: the D-series code family, covering the D-series terms mapped to that page. Nikon EN-EL batteries: the EN-EL code family, covering EN-EL15C, EN-EL14A, EN-EL15 and EN-EL3e terms. Sony NP-FZ100 batteries: the NP-FZ100 code family, including charger and dummy-battery terms. Sony A6000-series batteries: the A6000 battery family, including dummy-battery terms. Sony NP-FW50 batteries: the NP-FW50 code family, including charger and dummy-battery terms. Sony A7III-series batteries: the A7III battery family, including charger and dummy-battery terms. GoPro Hero batteries: the Hero battery family, covering the Hero terms mapped to that page.

Canon dummy batteries and Sony dummy batteries each have their own fitment pages, covering the dummy-battery terms mapped to those pages. Every fitment page on this site follows the same rule: it names the family, lists the terms covered on the page, carries no specification table, and asks the buyer to check the code printed on the original item before ordering. That rule is what keeps a fitment page honest when no detail page was opened for that code family.

The supplier at a glance

Shenzhen Ringteam Technology Co., Ltd. is based in Pingshan District, Shenzhen. Its official website is ringteam.com.cn, where the company presents its own store and company pages. Its product scope, as shown on its own homepage, covers camera power AC adapters by camera brand, camera digital battery packs by brand, camera battery chargers in six sub-families, DC couplers and dummy batteries, power connectors, DC power plates, power cables, camera grips, drone accessories, power banks and portable sources, photographic lights, battery charging cases, Insta360 accessories, GoPro accessories, camera lens accessories, other photographic accessories, camera stands, power inverters and storage bags.

According to the company's own storefront profile, the company describes its own factory and its own molding workshop, and states a 12-month warranty for its products with a wholesale reply service through a dedicated representative. Those are company statements, recorded here with attribution rather than as independently verified facts. This site publishes no street address, because the supplier's own contact page shows phone and email only, and two third-party address variants conflict. It publishes no headcount, revenue or market-share figures, no certificate scope beyond the standard line, and no prices, order-quantity figures or delivery figures. What it does publish is the product scope, the three fully specified products, the family and fitment organisation, and an inquiry route for everything else.

A buyer's walkthrough: from code to confirmed order

Step one is the code. Open the battery compartment, read the code printed on the original battery, and write it down exactly as printed, including any letters after the numbers. A single letter can separate two codes that look alike, and a charger matched to the wrong code will not charge the battery at all. If the code is worn off, the camera model narrows the search, but the code itself remains the reliable match, and this site asks buyers to confirm it before payment rather than ordering on appearance alone.

Step two is the family. Find the code family on this site — a Canon LP-E10, LP-E17 or LP-E6 page, a Nikon D-series or EN-EL page, a Sony NP-FZ100, A6000, NP-FW50 or A7III page, a GoPro Hero page, or a dummy-battery page — and read what that page actually says. Fitment pages name the family and list the terms covered on the page. They do not carry specification tables, and that absence is information in itself: it means the specification for that code family has not been published here and must be confirmed through an inquiry.

Step three is the charger question. A battery purchase usually raises a charger question at the same time: does the existing charger fit the replacement battery, and if not, which charger family covers it? Charger pages here are organised the same way as battery pages, by code and by brand, and the same rule applies — check the code, check the slots, check the inputs, and check the per-slot output. The DMW-BLK22 charger page shows the full pattern: display, slots, inputs, per-slot output, protections and material, each stated plainly.

Step four is the rig question, for buyers who shoot video. A cage changes how a camera handles: it adds weight, it changes the grip, and it decides which accessories can mount at the same time. The cage checklist on this site is thread sizes, cold shoe, grip, and access to battery and controls. A cage that blocks the battery door forces the shooter to strip the rig for every battery change, so battery access belongs on the checklist next to threads and shoe, not after them.

Step five is the inquiry. Send the product code, the camera model, and the quantity range being planned through the contact form. A good inquiry also states the charger inputs the setup already uses and any certification scope or warranty terms that matter for the order, so the supplier's answer can confirm fitment and terms in one round instead of several. Confirm MOQ, lead time and pricing for the order through the inquiry before payment. Certificates available upon request.

Charger inputs, displays and protections, explained

Inputs decide where a charger can run. A charger that draws from common USB power sources can run from a power bank, a car charger or a laptop, which suits location work where mains power is not at hand. A charger with only an AC input suits studio work better. The input question is therefore a location question first: where will this charger actually be used? Check the input list on the charger detail page for the exact charger being considered, and match it to the power sources the shoot already carries, rather than assuming every USB charger takes every USB source.

Displays decide how much attention charging needs. An LCD display showing battery level lets a shooter see, at a glance, which batteries are ready and which are still charging, instead of guessing or testing each battery in turn. For a buyer running several bodies, that visibility is worth more than a second charging bay without a display.

Per-slot output decides how long charging takes when both slots are full. A dual charger that delivers its full output to one slot and a lower output per slot with both slots in use is behaving normally, not underperforming — but the buyer should know both figures before ordering, so a two-battery turnaround can be planned honestly. Read both figures on the charger detail page for the exact charger being considered, and plan the turnaround from those figures rather than from the single-slot figure alone. A charger page that states only one figure has not answered the question, and the inquiry form is the place to ask for the other before payment.

Protections decide what happens when something goes wrong. Check which protections a charger lists before ordering, and compare that list against the risks of the shoot: long charging sessions, warm locations and shared power sources all raise the stakes. A charger page that lists no protections has not answered the question, and the inquiry form is the place to ask it before payment, with the battery code in the message so the answer covers the exact item.

Why this site publishes so little specification

A trade buyer who finds a specification table expects it to be true, and a wrong table is worse than no table at all. This site therefore publishes a specification table only where the supplier's own product page for that exact product was opened and read. That happened for three products: the Action6 replacement battery, the DMW-BLK22 LCD dual charger, and the camera cage for Sony A7III, A7RIII and A9 bodies. Every other page is a family or fitment page, and it says so plainly.

The same restraint applies to company facts. This site gives the district, not a street address, because the supplier's own contact page shows phone and email only and two third-party address variants conflict. It gives no headcount, revenue or market-share figures, because the only sources for those figures are third-party and conflicting. It gives no certificate scope beyond the standard line, because the certificate evidence conflicts. And it gives no prices, order-quantity figures or delivery figures anywhere, because those belong in a confirmed inquiry, not in catalogue copy. A buyer who wants any of those answers can ask through the contact form, and the supplier can answer for the specific order. That is the whole policy of this site: publish only what was actually read, and ask about the rest.